TLC／FID方法测定催化裂化原料油的烃族组成

测定了不同来源，不同种类的催化裂化原料油的薄层色谱图，提取了谱图特征变量，以偏最小二乘方法为数学工具，通过经典柱色谱法取得基础数据，建立催化裂化原料油的薄层色谱－烃族组成模型。采用该模型预测待测样品的烃族组成，并与经典柱色谱法的测定结果相比，饱和烃质量分数，芳烃质量分数和胶质质量分数的相关系数分别为0．9614，0．9359和0．9636。对子分析进行t检验的结果表明，本文建立的方法与经典柱色谱法的测定结果相一致。另外，薄层色谱法具有分析速度快，重现性好等优点。     

安徽省长江干堤的几种加固措施

安徽省境内765km的长江干堤，由于均是在原来旧堤的基础上经逐年加高培厚的，修筑时均未按设计要求施工，致使堤身密实度不够，新老堤土之间结合不牢，在汛期高水位时易产生渗漏。20世纪70年代以来，安徽省高度重视对长江干堤渗漏隐患的处理，经过长期的实践，逐渐摸索出一套行之有效的除险加固方法，如锥探灌浆、灭杀白蚁、冲抓套吉、垂直铺塑防渗、粘土铺盖及压渗盖重等处理措施。使长江干堤的渗漏隐患得以基本消除，其具体作法可供类似工程借鉴。     

Limit Cycles in a Class of Hybrid Dynamical Systems

This paper deals with qualitative analysis of the so-called switched fluid networks. Such networks are used to model communication, computer, and flexible manufacturing systems. We prove that for any deterministic network from a specific class, there exists a finite number of limit cycles attracting all the trajectories of the system. Furthermore, we determine this number. Date received: March 11, 2000. Date revised: January 19, 2001.     

Coalgebra morphisms subsume open maps

We relate two abstract notions of bisimulation, induced by open maps and by coalgebra morphisms, respectively. We show that open maps correspond to coalgebra morphisms for a suitable chosen endofunctor in a category of many sorted sets. This demonstrates that the notion of open-maps bisimilarity is of essentially coalgebraic nature. A central role in our development is played by a category of presheaves, which we show as corresponding to the subcategory of consistent coalgebras with lax cohomomorphisms.     

Investigation on Three Types of Residues in Phase-unwrapping

In phase unwrapping, how to control the residues and cut-lines is critical to unwrap ill-state wrapped phase map successfully. Some new concepts in phase unwrapping field are proposed. Firstly, the residues in three types, I.e., singular residues, normal residues and virtual residues, are classified, which leads to some rational unwrapping paths. Secondly, some differences between cut-line and curved-line are analyzed. And finally, experiment is carried out to compare our new enhanced Goldstein algorithm with the original Goldstein algorithm.     

Lower bound limit analysis using non‐linear programming

This paper describes a new formulation, based on linear finite elements and non‐linear programming, for computing rigorous lower bounds in 1, 2 and 3 dimensions. The resulting optimization problem is typically very large and highly sparse and is solved using a fast quasi‐Newton method whose iteration count is largely independent of the mesh refinement. For two‐dimensional applications, the new formulation is shown to be vastly superior to an equivalent formulation that is based on a linearized yield surface and linear programming. Although it has been developed primarily for geotechnical applications, the method can be used for a wide range of plasticity problems including those with inhomogeneous materials, complex loading, and complicated geometry. Copyright © 2002 John Wiley & Sons, Ltd.     

A geometry-based error estimation for cross-ratios

For choosing specific cross-ratios as 2D projective coordinates in various computer vision applications, a reasonable error analysis model is usually required. This investigation adopts the assumption of normal distribution for positioning errors of point features in an image to formulate the error variances of cross-ratios. Based on a geometry-based error analysis, a straightforward way of identifying the cross-ratios with minimum error variances is proposed. Simulation results show that the proposed approach, as well as a further simplified alternative, yield much better estimations of minimum error variances in terms of accuracy, cost, and stability compared with some other methods, e.g., the one based on the rule given by Georis et al. (IEEE Trans. Pattern Anal. Mach. Intell. 20 (4) (1998) 366). Some causes of the performance differences in the estimations are explained using a special configuration of point features.     

非织造产业中塑胶网带的用途

介绍了塑胶网带的用途和网带的种类 (玻璃纤维网带、金属网带和塑胶网带 )及其优缺点 ,并对网带的透风率、网带清理及网带收缩等问题进行了讨论     

多小波变换及其在信号滤波中的应用

多小波拥有对称性、正交性、有限支撑等这些信号处理中十分重要的特性,从而弥补了单小波的不足,具有更为广阔的应用前景.本文从滤波的角度,重点分析并设计了多小波预滤波与多小波分解系数处理方法.仿真表明多小波分析方法的优越性.     

复杂耦合系统的统计能量分析及其应用

文章综合导纳分析法、经典统计能量分析方法和经典功率流理论的各自优点，提出适合复杂耦合系统的统计能量分析方法，为研究实际机械结构之间的振动传递规律、复杂机械系统的声辐射特性提供理论依据，为实际工程结构的振动隔离、噪声治理提供理论指导。文章首次提出统计能量分析参数必须统一定义，将影响实际机械结构相互之间能量传递的若干要素各自分离，并引入相应的参数分别开展研究。利用理论研究的成果，发展后的统计能量分析首次应用于水下航行器振动和噪声特性分析，预报了水下航行器的振动传递规律和辐射噪声级。理论分析与实验测试结果符合较